This machine can make multiple sheets out of HDPE / PP / PS / LDPE / ABS waste.

Each sheet can recycle 14 kgs of plastic waste.

MAIN DESIGN COMPONENTS:

1) 1200 x 1200 mm Aluminum base attached with plate heaters and whole supporting heavy-duty structure: 1 no

2) Process Control Panel synchronized by one master control: 1 no

Technical Data:

Type Hydraulic  (Automatic)
Weight 430 KG
Dimensions 1500x1350x1600 MM
Pressure 10 - 50 Ton (Customizable)

SPECIFIC DATA 
  Material to be processed: Recycled HDPE/PP/LDPE/PS/acrylic Ground Scrap 
 Size to be manufactured: 1100 x 1100 mm Sheets 
 Output capacity: Depending upon the material used. 
 Recommended Mold size: 1200 x 1200 mm Top & bottom plates and frame. 
 Max. Sheet Output: 2 sheets per hour max. 
 Advanced Temperature control panel with power-saving technology. 
 Total Connected Load: 15* kW (Approx.) (3phase)        
MAIN SHEET PRESS
Supporting structure MS Powder coated. 
8-10 mm Top & bottom aluminum plates. 
Total 48 High-Grade Cartridge Heaters in the Machine, 24nos Heaters on each side mounted on aluminum plates to ensure equal distribution of heat. 
15-ton standard Manual Jack at the bottom of the pressing system with pressure gauge. 
Standard 4 rolling mechanism to ensure smooth up-down rolling of the bottom plate.
 PROCESS CONTROL PANEL: 

1. Temp. Controllers: PID Controller with Auto tuning & dual display

2. MCB: Reputed make MCB in line with every heating zone supply

3. Other Electrical Outlets: Contactors, Synchronization card, standard cord wiring with PVC conduct channel framing.

4. Phase Synchronizer and Over Voltage Protection as per CE Standard.