DESIGN COMPONENTS:

1) 1200 x 1200 mm Aluminum base attached with plate heaters and whole supporting heavy-duty structure: 1 no

2) Process Control Panel synchronized by one master control: 1 no

Technical Data:

SPECIFIC DATA 

1.   Material to be processed: Recycled HDPE/PP/LDPE/PS/acrylic Ground Scrap 
2.  Size to be manufactured: 1100 x 1100 mm Sheets 
3.  Output capacity: Depending upon the material used. 
4.  Recommended Mold size: 1200 x 1200 mm Top & bottom plates and frame. 
5.  Max. Sheet Output: 2 sheets per hour max. 
6.  Advanced Temperature control panel with power-saving technology. 
7.  Total Connected Load: 15* kW (Approx.) (3phase)        

MAIN SHEET PRESS

1. Supporting structure MS Powder coated. 
2. 8-10 mm Top & bottom aluminium plates. 
3. Total 48 High-Grade Cartridge Heaters in the Machine, 24nos Heaters on each side mounted on aluminium plates to ensure equal distribution of heat. 
4. 15-ton standard Manual Jack at the bottom of the pressing system with pressure gauge. 
5. Standard 4 rolling mechanism to ensure smooth up-down rolling of the bottom plate.

 PROCESS CONTROL PANEL: 

1. Temp. Controllers: PID Controller with Auto tuning & dual display

2. MCB: Reputed make MCB in line with every heating zone supply

3. Other Electrical Outlets: Contactors, Synchronization card, standard cord wiring with PVC conduct channel framing.

4. Phase Synchronizer and Over Voltage Protection as per CE Standard.