SheetPrees Mould A4

80.00
Capi2011
Out of stock
Processing time and rates:

SHEETPRESS MOULD

4-piece set to produce A4 size plastic sheets ( 287mm x 210mm ). Set consisting of;

• Top plate, made from 4 mm thick regular steel sheet (S235 JR ).

• Down plate, made from 4 mm thick regular steel sheet (S235 JR )

• Intermediate plate, made from 4 mm thick regular steel sheet (S235 JR )

• Intermediate plate, made from 2 mm thick regular steel sheet (S235 JR )

• Quick opening and closing screws and nuts, to facilitate molding / demoulding operations.

You will be able to make different combinations, in order to made different thicknesses of plastic sheets;

• 2 mm sheets -> only use the 2mm middle plate.

• 4 mm sheets -> only use the 4mm middle plate.

• 6 mm sheets -> you must use the 4mm middle plate and the 2mm middle plate.

The supply is immediate, since we usually have several molds in stock.


MOLDE PARA SHEETPRESS

Conjunto de 4 piezas para producir láminas plástico de tamaño A4 ( 287 mm x 210 mm ). Conjunto formado por;

· Tapa superior, fabricada en chapa de acero al carbono ( S235 JR) de 4 mm de espesor.

· Tapa inferior, fabricada en chapa de acero al carbono ( S235 JR) de 4 mm de espesor

· Tapa intermedia, fabricada en chapa de acero al carbono ( S235 JR ) de 4 mm de espesor

· Tapa intermedia, fabricada en chapa de acero al carbono ( S235 JR ) de 2 mm de espesor

· Tornillos y tuercas de apertura y cierre rápido, para facilitar las operaciones de moldeo/desmoldeo.

Gracias a las dos tapas intermedias, usted podrá hacer diferentes combinaciones, para así poder obtener diferentes espesores de láminas de plástico;

· Láminas de 2 mm--> sólo debe usar la tapa intermedia de 2 mm.

· Láminas de 4 mm--> sólo debe usar la tapa intermedia de 4 mm.

· Láminas de 6 mm--> debe usar la tapa intermedia de 4 mm y la tapa intermedia de 2 mm

El suministro es inmediato, ya que solemos contar con varios moldes en stock.






Country of Origin:
España
Dimensions :
34 x 25CM
Weight (KG):
7KG

Domestic shipping to

Spain:
Free

International shipping to

USA:
  • One item: €85.00
  • Each additional item: €40.00
Portugal:
  • One item: €5.00
  • Each additional item: €5.00
Italy:
  • One item: €20.00
  • Each additional item: €10.00
Germany:
  • One item: €15.00
  • Each additional item: €5.00
France, Metropolitan:
  • One item: €15.00
  • Each additional item: €5.00
Netherlands:
  • One item: €20.00
  • Each additional item: €10.00
Belgium:
  • One item: €15.00
  • Each additional item: €5.00
Denmark:
  • One item: €20.00
  • Each additional item: €10.00
Luxemburg:
  • One item: €20.00
  • Each additional item: €10.00
Austria:
  • One item: €20.00
  • Each additional item: €10.00
Poland:
  • One item: €25.00
  • Each additional item: €15.00
Czechia:
  • One item: €20.00
  • Each additional item: €10.00
Bulgaria:
  • One item: €20.00
  • Each additional item: €10.00
Cyprus:
  • One item: €20.00
  • Each additional item: €10.00
Croatia:
  • One item: €20.00
  • Each additional item: €10.00
Slovenia:
  • One item: €20.00
  • Each additional item: €10.00
Finland:
  • One item: €20.00
  • Each additional item: €10.00
Sweden:
  • One item: €20.00
  • Each additional item: €10.00
Latvia:
  • One item: €20.00
  • Each additional item: €10.00
Lithuania:
  • One item: €20.00
  • Each additional item: €10.00
Estonia:
  • One item: €20.00
  • Each additional item: €10.00
Romania:
  • One item: €20.00
  • Each additional item: €10.00
Greece:
  • One item: €20.00
  • Each additional item: €10.00
Ireland:
  • One item: €20.00
  • Each additional item: €10.00
Hungary:
  • One item: €20.00
  • Each additional item: €10.00
Had a great experience. Seller was prompt and I had the package in the USA in less than 2 weeks. I ordered the A4 size. It came as described and works well.
I ordered the Mediteranian mould kit, arrived in about a week (to the Netherlands) with a little damage in the corners, nothing big or important. The flat sides were unscaved. After welding my nozzle to the top plate I was ready to play!
One thing to note, after pressing the 4th injection I noticed that the bottom plate bent out a bit from the pressure! So plastic came out from the sides. I plan on flipping the bottom plate and reinforcing it with a bit of angle iron. First results: @timmakes on instagram
Our order was shipped promptly, complete, and the quality is good. We had a small issue with the US customs regarding the bearing but Capi2011 helped resolve it quickly. We are so excited to get our shred on! Thank you
Ik betaal de prijs voor roestvrijstalen kit en voeg nog eens 106 euro toe. erg duur voor mij om afgeleverd te worden. als ik wist, zou ik een gebouwde kit goedkoper kopen voor het geld dat ik uitgeef. wees er zeker van dat je niet door deze mensen wordt bedrogen zoals we werden bedrogen. te duur voor bouwpakket. nu kostte het me 400 plus om deze goedkope grap-kit te bouwen. Ik ben zo boos over deze zwendel van bezorging. wees voorzichtig met kopen.
Koop niet omdat de rechten en belastingen erg hoog zijn om uw shredderkit te krijgen.106 euro voor dit kleine ding en belast bovenop.hij is een gelukkig man die me niet helpt.Kom niet in hun buurt, ze geven niet om je als je koopt.Koop somerhing uit een land dat vrij is van deze rechten bij levering.Wees voorzichtig met het verborgene en ze helpen niet.
Seller is really fast to answer and to ship the products.
The item itself is good but please note "Regular Steel" it rust very quickly.
You need a powerful motor for this ;)
1,5 kW, 2HP at least.
Excellent quality and customer service.
Fast and easy.
Highly recommended.
Write a review