Automatic 1.5x1.5 Meter Sheet Press System
We provide installation, technical support, and virtual training for your new machine. We also offer an operating manual, how-to guides, and two years of free virtual maintenance to keep your equipment running smoothly.
This machine can make multiple sheets out of HDPE / PP / PS / LDPE / ABS waste.
Each sheet can recycle from 14-50 kgs of plastic waste.
MAIN DESIGN COMPONENTS:
- 1500x1500mm Aluminum Plate base attached with plate heaters and whole supporting heavy-duty structure: 1nos
- Automatic Hydraulic Jack System with Control system.
- Process Control Panel synchronized by one master control: 1 no.
TECHNICAL DATA
- Material to be processed: Recycled HDPE/PP/LDPE/PS/acrylic Grinded Scrap
- Size to be manufactured: 1500 x 1500 mm Sheets
- Output capacity: Depending upon the material used.
- Recommended Mold size: 1550 x 1550 mm Top & bottom plates and frame.
- Max. Sheet Output: 2 sheet per hour max.
- Advanced Temperature control panel with power-saving technology.
- Total Connected Load: 20* kW (Approx.)
MAIN SHEET PRESS
- Supporting structure MS Powder coated.
- 8-10 mm Top & bottom aluminum plates.
- 25 Heating plates on each side mounted on aluminum plates to ensure equal distribution of heat.
- 10-50 Ton standard Automatic Hydraulic Jack at the bottom of the pressing system with pressure gauge. Standard 4 rolling mechanism to ensure smooth up-down rolling of the bottom plate
AUTOMATIC HYDRAULIC SYSTEM:
- 10-50 Ton double stroke jack
- Pressure Gauge monitoring system
- Hand lever operated mechanism
- Directional control valve
- 1 HP Motor
- Overload switch protection for motor
- Pressure Pump
- Oil tank – 36 Liter
PROCESS CONTROL PANEL
- Temp. Controllers: PID Controller with Autotuning & dual display (OMRON)
- MCB: Reputed make MCB in line with every heating zone supply
- Other Electrical Outfits: Contactors, Synchronization card, standard cord wiring with PVC conduct channel framing.
- Phase Synchronizer and Over Voltage Protection as per CE Standard.
Our Sheetpress systems are CE CERTIFIED Under the below directives and Standards
1. 2006/42/EC
2. 2014/35/EU
Condition
:
New
Country of Origin
:
India
Made according to the Precious Plastic drawings?
:
Yes
Weight (KG)
:
730KG
Domestic shipping to
India:
Free
International shipping to
Australia:
- One item: €1,700.00
- Each additional item: €0.00
Africa:
- One item: €1,600.00
- Each additional item: €0.00
Asia:
- One item: €1,400.00
- Each additional item: €0.00
North America:
- One item: €1,700.00
- Each additional item: €0.00
South America:
- One item: €1,600.00
- Each additional item: €0.00
Europe:
- One item: €1,700.00
- Each additional item: €0.00
Oceania:
- One item: €1,600.00
- Each additional item: €0.00
Shipping Information
: