1x1 Meter Sheet Press Workshop

"Providing the required services with utmost sincerity to our customers is our forte".  

We Provide:

  • Complete technical support & Installation 
  • Free virtual training upon receiving the machine
  • We provide operating manual & safely regulations 
  • An additional 2 years warranty & free virtual maintenance is also provided

1) Hot Press

2) Cold Press

3) Preparation Table

4) Trolleys

1) Hot Press:

MAIN DESIGN COMPONENTS:

1) 1200 x 1200 mm Aluminum base attached with plate heaters and whole supporting heavy-duty structure: 1 no

2) Process Control Panel synchronized by one master control: 1 nos.

Technical Data:

TypeHydraulic
Weight430 KG
Dimensions1500x1350x1600 MM
Pressure10 - 50Tonn
SPECIFIC DATA 
  1.   Material to be processed: Recycled HDPE/PP/LDPE/PS/acrylic Ground Scrap 
  2.  Size to be manufactured: 1000 x 1000 mm Sheets 
  3.  Output capacity: Depending upon the material used. 
  4.  Recommended Mold size: 1050 x 1050 mm Top & bottom plates and frame. 
  5.  Max. Sheet Output: 1 sheet per hour max. 
  6.  Advanced Temperature control panel with power-saving technology. 
  7.  Total Connected Load: 15* kW (Approx.) (3phase)        
MAIN SHEET PRESS
  1. Supporting structure MS Powder coated. 
  2. 8 mm Top & bottom aluminium plates. 
  3. 20 Heating plates on each side mounted on aluminium plates to ensure equal distribution of heat. 
  4. 10 -50Ton standard Manual Jack at the bottom of the pressing system with pressure gauge. 
  5. Standard 4 rolling mechanism to ensure smooth up-down rolling of the bottom plate.

2) Cold Press

DESIGN PARAMETERS WITH STANDARD SUPPLY:

  • 1200 x 1200 mm MS Plate base attached with plate and whole supporting heavy duty structure: 1nos.

 

MAIN SHEET PRESS

  •  Size to be manufactured: 1000 x1000 mm Sheets
  • Supporting structure MS Powder coated.
  • 2-4 mm Top & bottom MS plates.
  • 10 Ton standard Manual Jack at the bottom of the pressing system with pressure gauge.
  • Standard 4 rolling mechanism to ensure smooth up-down rolling of the bottom plate.

3) Preparation Table:

DESIGN PARAMETERS WITH STANDARD SUPPLY

  • MS metal base attached with 2 recycled plastic sheets supporting heavy duty structure: 1nos.

Main Preparation Table:

  •  2 Top & bottom 18 mm recycled plastic sheets.
  • 4 Supporting structure MS Metal Powder coated.
  • 4 rolling wheel mechanisms to ensure smooth movement. (Optional)

4) Trolleys

MAIN MOULD TROLLEY: 

  • 4 MS metal square tube structure
  • 4 Flat MS metal flat bar
  • Full structure welded & Powder Coated 4 rolling wheel mechanism to ensure smooth movement. (Optional)

Customization is available as per your need.

International Shipping Available

Country of Origin:
India
Weight (KG):
900KG

Domestic shipping to

India:
Free

International shipping to

Australia:
  • One item: €1,700.00
  • Each additional item: €0.00
Africa:
  • One item: €1,500.00
  • Each additional item: €0.00
Asia:
  • One item: €1,500.00
  • Each additional item: €0.00
North America:
  • One item: €1,600.00
  • Each additional item: €0.00
South America:
  • One item: €1,700.00
  • Each additional item: €0.00
Europe:
  • One item: €1,500.00
  • Each additional item: €0.00
Oceania:
  • One item: €1,600.00
  • Each additional item: €0.00
Ordered sheet press 1.5m, shredder machine and V3 extruder for expansion of my workshop in Houston. The quality, finishing and product is exceptional! Their team is very patient to help with virtual setup and provided me quick response and feedback. I was skeptical to order it all the way across from different country but it turned out to be great decision and saved lot of money as well! Highly recommended!
Great Service, Quick reply and good machine.
Thank you for helping me set up my workshop
Write a review

1x1 METER SHEET PRESS WORKSHOP (HOT & COLD PRESS + PREPARATION TABLE + TROLLEYS)

7,000.00
In stock
+
Contact Seller
Shipping Information:

Similar items

India

3,134.00

 Shipping available

Spain

490.00

 No shipping to your country

Mexico

7,979.00

 Shipping available