The perfect setup to get you started recycling!
We provide virtual sessions to run the machine efficiently. We also provide complete technical support, installation, and virtual training for free upon receiving the machine.
45 Kg/Hr Max. extrusion output |
10 HP AC Motor with Frequency Drive |
10 ft Can make up to 10 feet beam |
80 Screw RPM |
Key features
| Smooth screw extruder 1820 mm / 50D / 10 HP Smooth Screw extruder – HDPE/PP/LDPE/PS/ABS/PLA |
Beam length Size to be manufactured: Up to 10ft Length. Can make up to 10 feet beam. |
| Screw L- 1820 mm, OD – 50mm. Screw RPM: 80. |
Barrel L- 1750 mm, OD-110mm, ID- 50mm |
| Extrusion output Max. Extrusion Output: 45 Kg/Hr. |
Main motor AC Motor 10HP With Frequency Drive |
| Barrel heating 4 Heating Zones (Ceramic Band Heater with Energy Saving). Barrel Heating Loads: 5 kW. |
Gear reducer Extrusion Gearbox with heavy-duty thrust bearing |
| Screw barrel material EN 41B Nitro alloy steel duly gas nitride |
Control Process Control Panel synchronized by one master control. Advanced extrusion control with optimized workflow to fill moulds. |
| Safety Consist of additional safety features. Phase Synchronizer and Over Voltage Protection as per CE Standard. |
Support and shipping Free technical support, installation, and virtual training. International Shipping is Available via sea till the seaport in your region. |
Design parameters with standard supply
- 1820 mm / 50D / 10 HP Smooth Screw extruder – HDPE/PP/LDPE/PS/ABS/PLA
- Process Control Panel synchronized by one master control: 1 no.
Technical specifications: Specific data
| Specification | Detail |
|---|---|
| Material to be processed | Recycled HDPE/PP/LDPE/PS Grinded Scrap |
| Size to be manufactured | Up to 10ft Length |
| Screw RPM | 80 |
| Screw size | L- 1820 mm, OD – 50mm |
| Barrel size | L- 1750 mm, OD-110mm, ID- 50mm |
| Max. Extrusion Output | 45 Kg/Hr. |
| Control | Advanced extrusion control with optimized workflow to fill moulds |
| Total Connected Load | 15* kW (Approx.) |
Technical specifications: Main extruder
| Specification | Detail |
|---|---|
| Barrel type | Smooth Feed Barrier type high-speed design |
| Screw barrel material | EN 41B Nitro alloy steel duly gas nitride |
| Gear reducer | Extrusion Gearbox with heavy-duty thrust bearing |
| Main motor | AC Motor 10HP With Frequency Drive |
| Barrel heating zones | 4 Heating Zones (Ceramic Band Heater with Energy Saving) |
| Barrel heating loads | 5 kW. |
| Hopper loader | M.S. Fabricated Hopper |
| Structure | MS fabricated heavy-duty structure made from angles, and channels and Covered with sheet |
Technical specifications: Process control panel
| Specification | Detail |
|---|---|
| Temp. Controllers | PID Controller with Autotuning & dual display |
| MCB | Reputed make MCB in line with every heating zone supply |
| Other Electrical Outfits | Amp. Meter, Contactors, Synchronization card, standard cord wiring with PVC conduct channel framing. |
| Safety | Phase Synchronizer and Over Voltage Protection as per CE Standard. |
Technical specifications: Machine summary
| Specification | Detail |
|---|---|
| Machine size | 7 X 3 X 6 FT |
| Screw size | 50 X 1820 MM |
| Material | EN 41B MOSCOW |
| Barrel | OD 100 ID 50 |
| Heating zone | 6 heating zone with 4 PID controllers |
| Heater rating | 1.8 KW |
| Screw rotation speed | Adjustable |
| AC drive | 10 HP: ABB |
| Motor | 10 HP (ABB BRAND) |
| Gearbox | Heavy extruder gearbox |
| Output gearbox torque | 149 NM |
| Power supply | 3 PHASE 415 VOLT |
| Power load | 15 KW |
| Output | 45 KG/HR |
| Material | HDPE, LDPE, PP, HIPS, PS |
| Machine weight | 1200 KG |
| Working area | 17 X 5 FT |
| Max. speed | Up to 80 RPM |
Benefits of using this machine
- Robust Production
- Consist of additional safety features
- Can make up to 10 feet beam
- Low energy consumption due to its advanced heating system
- Low maintenance required
- Ideal for remote locations and small spaces
About Carbon Fusion
Meet Carbon Fusion: Your Gateway to Plastic Recycling Fun!
Ready to turn your pile of old plastic into something awesome? Say hello to Carbon Fusion, the perfect desktop extrusion machine to kick off your recycling adventure in style!
Brought to you by The Carbon Fusion—a plucky Indian start-up with a serious knack for turning trash into treasure. Our team of recycling wizards (including one of the brains working since 2018 with some unique solutions) is on a mission to make High-Quality, Affordable recycling equipment inspired by the Precious Plastic Ecosystem for everyday heroes like you.
We're not just about machines—we're about movement. Our gear is spinning, shredding, extruding, and injecting plastic in over 35 countries across 6 continents, and we're just getting started. Have questions? Stuck in a plastic pickle? Our friendly team is here 24/7 to guide you every step of the way.
We ship worldwide and accept payments in multiple currencies — if your country isn't listed or you need a custom invoice, just give us a shout.
Need help or just want to chat? Click that shiny "Contact Seller" button and we'll be right with you.
CARBON FUSION is a registered company in INDIA under VAT(GST) number 09CAUPS1198H1ZU and We ship around the globe.
FAQs
Machine specifications
- 380V - 400V
Safety & compliance
- CE (European Union)
Domestic shipping to
International shipping to
- One item: €2,667.00
- Each additional item: €0.00
- One item: €2,667.00
- Each additional item: €0.00
- One item: €2,667.00
- Each additional item: €0.00
- One item: €2,667.00
- Each additional item: €0.00
- One item: €2,667.00
- Each additional item: €0.00
- One item: €2,667.00
- Each additional item: €0.00
