Bow tie mould - ready to use.
On first picture ( from left side)
1. Bow tie mould - "Bended"
2. Bow tie mould - "Round
3. Bow tie mould - "Sharpie"
The mould consists of:
- Bottom plate - thickness 8 mm;
- Middle plate - thickness 3 mm;
- Top plate - thickness 8 mm;
- 1x connector (individual, welded on);
- 6x Nuts M8;
- 6x Screws M8
The mounting screws (M8) are welded to the bottom plate for easier disassemble and assemble.
The connectors to a injection machine are optional:
- welded M20 nut;
- 45 degree conus
3/4 inch connector (or optional)
We are providing full technical support about our moulds (dimensions & wall thickness changes, and type of welded connector )
We are on mission to make small scale plastic recycling more accessible
Team Precious Plastic Slovakia