Welcome to Modular design for Precious Plastic customers around the world.
A Modular format of V3.3 New Design Shredder machines to suit all operational requirements involving Plastic recycling process. From cost of operation to granulation per hour and a Modualr machine design to suit the PP community.
ModualrDesignPP was gifted this page from the previous owner, who has allowed this modular principle of the V3.3 Modular thinking to be brought to life for the Precious Plastic Community.
The word "Plastic" – The world’s most talked about waste blighting the world’s land's and oceans, from their single-use unacceptability as defined by Media and daily common sence around us all, plastics have become one of – if not the – most talked about ‘wastes’ on the planet. ModulardesignPP is required to promote greater reuse and recycling of plastic re-usability. But where does recycling/shredding fit in? Look no further than ModulardesignPP.
We believe that a Modular format of the V3.3 brings a difference within all area's of recycling and with a benefit use of different size of shredder with your specific recycling or operational needs within the environment/Circular/Substainable Goal we all dream of in the future.
By use of 3 cutting blades on each rotating tooth the modulardesignpp design allows for an increase of granule output due to the increased cut of each shaft rotation. The design cutting output is a productive direction at a cost saving per hour.
The new design V3.3 will be available in different model formats for your specific workshop, cost, eco, interchangable needs. The principle of the modualr direction is small to larger machine, but with a difference of conversion between all the shredder machines that shall be presented to the community via this page.
The reduced/mini V3.3 is at a cost level to suit the minimal recycle needs of the operator. This Mini modulardesignPP can now be operated by use of a crank handle, reduced KW motor or torque drill with variable speed and torque setting allowing the operator to set the RPM or NM requirement. This Mini 7 blades design is at a cost level to suit those customers of Precious Plastic who feel a drill, smaller KW motor or crank handle operation is suitable, still effective to get that task completed without a motor or wormgear cost.
The Open Source V3.3 basic - 14 blade has already been placed in the 4 corners of the world with a power defined by the operators of Motor setup or crank handle usage.
The ModulardesignPP designed V3.3 - XL 21 blade is making its mark out there and is favourable with 1.5KW to 2KW plus power/wormgear systems/setup for operation.
The principle of the designs is that all machines described will inter-change via a conversion kit at much lower cost. or if you feel that one week a small task is required. the design is interchangable with simplicity for the user of the V3.3 Machines.
An example being. If you purchased the Mini or 14 blade and feel in the future that the 21 blade is a more suitable operation as your needs grow. Buy the conversion kit from the Mini or 14 blade by adding only the required conversion to make that Shredder into the 21 blade and the other way round. up or down in the operation as you feel the need for recycling or as you grow in the PP community.
The XL upwards can be configured/built to accept 8mm and 10mm teeth Shredder/Crusher requirement. Please message for operational interest.
if you require international shipping not listed, please message to allow assistance to your location. Customs Duties and tax may be added to the citizens of certain countries around the world. Please be aware when ordering. Modulardesignpp does not pay the customs duties on shipped items.
Please contact if you require further information or advice.