Bow tie mould - ready to use.
On first picture ( from left side)
1. Bow tie mould - "Bended"
2. Bow tie mould - "Round
3. Bow tie mould - "Sharpie"
The mould consists of:
- Bottom plate - thickness 8 mm;
- Middle plate - thickness 3 mm;
- Top plate - thickness 8 mm;
- 1x connector (individual, welded on);
- 6x Nuts M8;
- 6x Screws M8 (welded on).
The mounting screws (M8) are welded to the bottom plate for easier disassemble and assemble.
The connectors to a injection machine are optional:
- welded M20 nut;
- 45 degree conus
3/4 inch connector (or optional)
We are providing full technical support about our moulds (dimensions & wall thickness changes, and type of welded connector )
We are on mission to make small scale plastic recycling more accesible
Feel free to contact us on:
Country of Origin:
Slovakia
Dimensions :
17x9x3CM
Weight (KG):
approx. 3KG
Domestic shipping to
Slovakia:
Free
International shipping to
United States:
- One item: €94.00
- Each additional item: €0.00
Switzerland:
- One item: €30.00
- Each additional item: €0.00
Spain:
- One item: €28.00
- Each additional item: €0.00
Romania:
- One item: €17.00
- Each additional item: €0.00
Poland:
- One item: €30.00
- Each additional item: €0.00
Norway:
- One item: €103.00
- Each additional item: €0.00
Italy:
- One item: €22.00
- Each additional item: €0.00
Hungary:
- One item: €13.00
- Each additional item: €0.00
Germany:
- One item: €18.00
- Each additional item: €0.00
Czech Republic:
- One item: €14.00
- Each additional item: €0.00