Modulardesign have gone "RETRO" for the community with the V2.1 Stainless Steel Shredder Laser Cut Parts. This Retro Parts kit is now the perfect design tolerance for the community, Modular design adjusted this V2.1 for the perfect slot together fit without the extensive grinding that was needed on previous V2.1 to fit it together, plus Modulardesign give you lowest price to the community project. 

We know shipping is important to you:

Guaranteed trustable Quality shipping service at the cheapest cost available on precious plastic website to the community with included shipping protection, email updates on tracking, signature release at your location and most important a very reliable, trusted service. When we pack it, we protect it all the way.


Very affordable V2.1 Stainless Steel Parts kit in a box, packed and shipped as the community would expect. All laser cut parts including the Extra's available are in Stainless steel according to the version 2.1 R2 Basic Shredder, but with a Modulardesign tolerance difference for ease of building this shredder.


Too complete kit build -  V2.1 Shredder - You will need the following items: UCFL 204 Bearings, shaft. Nuts, bolts and threaded rod. ( Not included) But available from the link Below, Ebay or a local DIY supplier very cheap. The recommended load bearing operating torque of the V2.1 27mm hex face, turned to 20mm shaft with motor/gearbox ratio would be maximum best operating duty cycle of 300Nm.


The community can purchase the V2.1 shaft and UCFL 204 bearings from a competent qualified engineer selling your needs at an excellent low cost to complete your build to operation. Please click on this link for Affordable shaft and bearings.


We kept our V2.1 price at its lowest cost to allow you to purchase the required rotation parts.


To assemble the Shredder you may need to handle the pieces ( lightly sand, drill plus countersinking for bearing positioning and weld).


Extra free 0.5 mm shims are added to compensate for possible thickness of rolled plate factory tolerance. 2 x 0.5mm Knife Spacer Shims (27.20mm hex spacers), 2 x 0.5mm Fixed Knife Shims, 2 x 0.5mm Shaft to bearing Spacer Shims (20.20mm inner dia.) These shims will allow you to build the tolerance you need for the perfect V2.1 shredder build.


Modulardesignpp added tolerance design for the perfect fitment of hex spacers and rotating teeth onto the 27mm precious plastic V2.1 shaft. No more filing or grinding to get your stainless steel rotating teeth and hex spacers to fit. Rotating teeth and hex spacers are now a perfect 27.20m slide fit for the community.


The quality of laser cutting is to an expected high standard, but slight deburring or sanding may be needed during your assembly.


There are many expert plus community member, quality presented V2.1 shredder build video's available on YouTube to assist the community and help you make it a simple build from start to your finished Shredder machine. 



Stainless Steel Lasercut parts and 6mm mesh shipped to your location around the world and at a low shipping cost to suit.


Please Message us if you own the V2.1 and need parts. We will cut your V2.1 spare parts to your DXF and ship at speed to your location. We are happy to create a page for your order needs.


Please message your location to be added to the shipping list if you do not see it listed in the shipping section or find you cannot order due to location issue. Please also check your shipping Destination. Modulardesignpp are doing all we can to keep the price low. Certain international customers may find that imported goods could be subject to import/customs (DAP) duties. Modulardeign do not pay these fees. please check your location.



We operate a five Business days procedure. When counting “5 business days” we do not work weekends and seasonal national holidays. This means Moduardesign are open for the community from Monday till Friday and are closed on weekends (Saturdays and Sundays being rest days).




Thank you

About Modulardesignpp



Country of Origin:
United Kingdom
Dimensions :
As per Precious Plastic SpecificationCM
Weight (KG):
12KG

Domestic shipping to

United Kingdom (Great Britain):
  • One item: €10.00
  • Each additional item: €0.00

International shipping to

USA:
  • One item: €38.00
  • Each additional item: €0.00
Germany:
  • One item: €26.00
  • Each additional item: €0.00
Puerto Rico:
  • One item: €36.00
  • Each additional item: €0.00
Singapore:
  • One item: €42.00
  • Each additional item: €0.00
Zambia:
  • One item: €38.00
  • Each additional item: €0.00
Switzerland:
  • One item: €28.00
  • Each additional item: €0.00
Japan:
  • One item: €35.00
  • Each additional item: €0.00
New Zealand:
  • One item: €47.00
  • Each additional item: €0.00
South Korea:
  • One item: €49.00
  • Each additional item: €0.00
Canada:
  • One item: €38.00
  • Each additional item: €0.00
Ghana:
  • One item: €52.00
  • Each additional item: €0.00
Mexico:
  • One item: €56.00
  • Each additional item: €0.00
Australia:
  • One item: €55.00
  • Each additional item: €0.00
Latvia:
  • One item: €28.00
  • Each additional item: €0.00
Estonia:
  • One item: €28.00
  • Each additional item: €0.00
Austria:
  • One item: €28.00
  • Each additional item: €0.00
Sweden:
  • One item: €25.00
  • Each additional item: €0.00
Slovenia:
  • One item: €25.00
  • Each additional item: €0.00
Greece:
  • One item: €25.00
  • Each additional item: €0.00
Denmark:
  • One item: €24.00
  • Each additional item: €0.00
Netherlands:
  • One item: €24.00
  • Each additional item: €0.00
Poland:
  • One item: €25.00
  • Each additional item: €0.00
Hungary:
  • One item: €24.00
  • Each additional item: €0.00
Croatia:
  • One item: €25.00
  • Each additional item: €0.00
Italy:
  • One item: €24.00
  • Each additional item: €0.00
Portugal:
  • One item: €24.00
  • Each additional item: €0.00
Spain:
  • One item: €24.00
  • Each additional item: €0.00
Kenya:
  • One item: €44.00
  • Each additional item: €0.00
Belgium:
  • One item: €24.00
  • Each additional item: €0.00
Chile:
  • One item: €44.00
  • Each additional item: €0.00
Norway:
  • One item: €26.00
  • Each additional item: €0.00
Czechia:
  • One item: €24.00
  • Each additional item: €0.00
Denmark:
  • One item: €24.00
  • Each additional item: €0.00
Thailand:
  • One item: €42.00
  • Each additional item: €0.00
Malaysia:
  • One item: €47.00
  • Each additional item: €0.00
Hong Kong:
  • One item: €36.00
  • Each additional item: €0.00
Romania:
  • One item: €26.00
  • Each additional item: €0.00
Slovakia:
  • One item: €25.00
  • Each additional item: €0.00
Finland:
  • One item: €24.00
  • Each additional item: €0.00
Lithuania:
  • One item: €26.00
  • Each additional item: €0.00
Turkey:
  • One item: €26.00
  • Each additional item: €0.00
Indonesia:
  • One item: €45.00
  • Each additional item: €0.00
Peru:
  • One item: €45.00
  • Each additional item: €0.00
Colombia:
  • One item: €45.00
  • Each additional item: €0.00
Morocco:
  • One item: €45.00
  • Each additional item: €0.00
Moldova, Republic of:
  • One item: €29.00
  • Each additional item: €0.00
Europe:
  • One item: €26.00
  • Each additional item: €0.00
Coli reçu un peu en retard par rapport aux délais annoncés. Ensuite les éléments (rondelles, rivets...) se trouvaient dans le carton en vrac sans emballage, des rivets étaient tordus donc inutilisables. Une fois monté le broyage est quand même compliqué, c'est dur, vite épuisant, il y a beaucoup de frottements entre les lames et la manivelle fournie n'est pas de bonne qualité. Elle se tord facilement dès que ça bloque, elle aurait méritée d'être vraiment plus solide. Dans l'ensemble je suis déçu de mon achat même si l'ensemble est solide, je pense à mettre un moteur car ce n'est pas envisageable de continuer manuellement.

-
(translated by the Bazar Team)
Package received a little late compared to the announced deadlines. Then the elements (washers, rivets...) were in the loose box without packaging, the rivets were twisted and therefore unusable. Once mounted, the grinding is still complicated, it's hard, quickly exhausting, there is a lot of friction between the blades and the crank provided is not of good quality. It twists easily as soon as it blocks, it would have deserved to be really stronger. Overall I'm disappointed with my purchase even if the whole thing is solid, I'm thinking of putting in a motor because it's not possible to continue manually.
Excellent services. Very fast response.
A fantastic product machined to exacting levels of accuracy. Great communication and assistance throughout the process. Arrived well packaged and in great time. Would definitely recommend to buy from the team.
Very Quick to respond to questions; knowledgeable about shredder construction and parts sourcing; Order shipped quickly and delivered in perfect condition. They are a very good asset to the PP community.

I highly recommend!
very Happy with my purchase, very reasonable price, quick shipping. Seller answered all the questions I had.
Purchased a shredder body and duct from alana and reading shredding , very professional , kept up to date every step of the way , very hassle free. Would definitely recommend and buy again , goods nicely made and dispatched. thank you

oh and on time !!!
I purchased a shredder kit from Reading Shredder a few weeks back. I had no experience building a shredder, first time bazaar buyer and was a little skeptic about being able to gather all the right parts. Alana was great from the start, he answered all my questions pertaining about the kit and he gave me a bunch of building recommendation (motor type, coupling, etc)

He kept the me informed through out the whole process, from production schedule to shipping and receiving. The package had no delays with customs. No hidden fees, it was a pretty straightforward transaction.

The Shredder kit is great, built solid, it has all the parts. I’m currently in the middle of wiring it together. Hope to share and post final build.

I would recommend and will buy again from RS without a doubt. The customer service and open communication is priceless, it kept my anxiety down and has encouraged me to purchase from the PS bazar in the future.

Thank you Alana & Reading Shredder
Write a review

V2.1 Stainless Steel Laser cut Parts kit. Cut to a High Standard, Including 6mm round hole Mesh.

270.00
In stock
+
Contact Seller
Shipping Information :