We have gone "RETRO" for the community with the Regular Steel V2.1 Shredder Laser Cut Parts. This Retro Parts kit is now the perfect design tolerance for the community, Modular design adjusted this V2.1 for the perfect slot together fit without the extensive grinding that was needed on previous V2.1 to fit it together, plus, we give you lowest price to the community project. 

We know shipping is important to you:

Guaranteed trustable Quality shipping service at the cheapest cost available on precious plastic website to the community with included shipping protection, email updates on tracking, signature release at your location and most important a very reliable, trusted service. When we pack it, we protect it all the way.


Very affordable V2.1 Parts kit in a box, packed and shipped as the community would expect. All laser cut parts are in regular steel according to the version 2.1 R2 Basic Shredder, but with a tolerance difference for ease of building this shredder.


Too complete kit build -  V2.1 Shredder - You will need the following items: UCFL 204 Bearings, shaft. Nuts, bolts and threaded rod. ( Not included) But available from the link Below, Ebay or a local DIY supplier very cheap. The recommended load bearing operating torque of the V2.1 27mm hex face, turned to 20mm shaft with motor/gearbox ratio would be maximum best operating duty cycle of 300Nm. we can supply a good honest turner to turn your shaft for you at cheap cost and delivery. message please and information will be sent to you.


The community can purchase the V2.1 shaft and UCFL 204 bearings from a competent qualified engineer selling your needs at an excellent low cost to complete your build to operation. Please click on this link for Affordable shaft and bearings. 


We kept our V2.1 price at its lowest cost to allow you to purchase the required rotation parts.


To assemble the Shredder you may need to handle the pieces ( lightly sand, drill plus countersinking for bearing positioning and weld).


Extra free 0.5 mm shims are added to compensate for possible thickness of rolled plate factory tolerance. 2 x 0.5mm Knife Spacer Shims (27.20mm hex spacers), 2 x 0.5mm Fixed Knife Shims, 2 x 0.5mm Shaft to bearing Spacer Shims (20.20mm inner dia.) These shims will allow you to build the tolerance you need for the perfect V2.1 shredder build.


We added tolerance design for the perfect fitment of hex spacers and rotating teeth onto the 27mm precious plastic V2.1 shaft. No more filing or grinding to get your rotating teeth and hex spacers to fit. Rotating teeth and hex spacers are now a perfect slide fit at 27.20mm for the community.


The quality of laser cutting is to an expected high standard, but slight deburring or sanding may be needed during your assembly.


There are many expert plus community member, quality presented V2.1 shredder build video's available on YouTube to assist the community and help you make it a simple build from start to your finished Shredder machine. 



Lasercut parts and 6mm mesh shipped to your location around the world and at a low shipping cost to suit.


Please Message us if you own the V2.1 and need parts. We will cut your V2.1 spare parts and ship at speed to your location. We are happy to create a page for your order needs.


Please message your location to be added to the shipping list if you do not see it listed in the shipping section or find you cannot order due to location issue. Please also check your shipping Destination. We are doing all we can to keep the price low. Certain international customers may find that imported goods could be subject to import/customs (DAP) duties. We do not pay these fees please check your location.


We operate a five Business days procedure. When counting “5 business days” we do not work weekends and seasonal national holidays. This means we are open for the community from Monday till Friday and are closed on weekends (Saturdays and Sundays being rest days).



Thank you

About



Country of Origin:
United Kingdom
Dimensions :
As per Precious Plastic SpecificationCM
Weight (KG):
10KG

Domestic shipping to

United Kingdom (Great Britain):
  • One item: €10.00
  • Each additional item: €0.00

International shipping to

USA:
  • One item: €38.00
  • Each additional item: €0.00
Ireland:
  • One item: €27.00
  • Each additional item: €0.00
Germany:
  • One item: €26.00
  • Each additional item: €0.00
Puerto Rico:
  • One item: €36.00
  • Each additional item: €0.00
Singapore:
  • One item: €42.00
  • Each additional item: €0.00
Zambia:
  • One item: €38.00
  • Each additional item: €0.00
Venezuela:
  • One item: €39.00
  • Each additional item: €0.00
Switzerland:
  • One item: €28.00
  • Each additional item: €0.00
Japan:
  • One item: €35.00
  • Each additional item: €0.00
New Zealand:
  • One item: €47.00
  • Each additional item: €0.00
South Korea:
  • One item: €49.00
  • Each additional item: €0.00
Canada:
  • One item: €38.00
  • Each additional item: €0.00
Ghana:
  • One item: €52.00
  • Each additional item: €0.00
Mexico:
  • One item: €56.00
  • Each additional item: €0.00
Australia:
  • One item: €55.00
  • Each additional item: €0.00
Latvia:
  • One item: €28.00
  • Each additional item: €0.00
Estonia:
  • One item: €28.00
  • Each additional item: €0.00
Austria:
  • One item: €28.00
  • Each additional item: €0.00
Sweden:
  • One item: €25.00
  • Each additional item: €0.00
Slovenia:
  • One item: €25.00
  • Each additional item: €0.00
Greece:
  • One item: €25.00
  • Each additional item: €0.00
Denmark:
  • One item: €24.00
  • Each additional item: €0.00
Netherlands:
  • One item: €24.00
  • Each additional item: €0.00
Poland:
  • One item: €25.00
  • Each additional item: €0.00
Hungary:
  • One item: €24.00
  • Each additional item: €0.00
Croatia:
  • One item: €25.00
  • Each additional item: €0.00
Italy:
  • One item: €24.00
  • Each additional item: €0.00
Portugal:
  • One item: €24.00
  • Each additional item: €0.00
Spain:
  • One item: €24.00
  • Each additional item: €0.00
Kenya:
  • One item: €44.00
  • Each additional item: €0.00
Belgium:
  • One item: €24.00
  • Each additional item: €0.00
Chile:
  • One item: €44.00
  • Each additional item: €0.00
Norway:
  • One item: €26.00
  • Each additional item: €0.00
Czechia:
  • One item: €24.00
  • Each additional item: €0.00
Denmark:
  • One item: €24.00
  • Each additional item: €0.00
Thailand:
  • One item: €42.00
  • Each additional item: €0.00
Malaysia:
  • One item: €47.00
  • Each additional item: €0.00
Hong Kong:
  • One item: €36.00
  • Each additional item: €0.00
Romania:
  • One item: €25.00
  • Each additional item: €0.00
Slovakia:
  • One item: €25.00
  • Each additional item: €0.00
Finland:
  • One item: €24.00
  • Each additional item: €0.00
Lithuania:
  • One item: €26.00
  • Each additional item: €0.00
Turkey:
  • One item: €35.00
  • Each additional item: €0.00
Indonesia:
  • One item: €45.00
  • Each additional item: €0.00
Peru:
  • One item: €45.00
  • Each additional item: €0.00
Colombia:
  • One item: €45.00
  • Each additional item: €0.00
Morocco:
  • One item: €45.00
  • Each additional item: €0.00
Moldova, Republic of:
  • One item: €29.00
  • Each additional item: €0.00
Europe:
  • One item: €26.00
  • Each additional item: €0.00
France:
  • One item: €25.00
  • Each additional item: €0.00
Sierra Leone:
  • One item: €43.00
  • Each additional item: €0.00
USELESS - WASTE OF MONEY

This has been the most expensive purchase and at the same time disappointing in my entire life.
My intention has always been to be able to attach a motor to the coupling, it is extremely difficult to make and start up.
once I was able to get it to work, IT DOESN'T GRIND.
You can only pass one plastic cap at a time and the whole half comes out, no matter how many times you pass it, it can't work. It is weightlessly designed.

The equipment is designed to be:
. complex to assemble
.complex to make it work.
. complex worth paying for this.

It is very sad that there is no purchase guarantee because it has been extremely expensive so that now it will only be garbage in my deposit.
Review for STAINLESS STEEL V 3.3 -14 BLADE SHREDDER AND SIEVE COMPLETE FULL KIT OR BUILT.

I have replaced the back nuts (8) on the vertical assembly rods (4) with spacing tubes (conduit) to improve this assembly.

Thank you!
Review for V2.1 EN8 BRITISH STEEL PARTS KIT - QUALITY LASERCUT PARTS 6MM MESH INCLUDED. VERY LOW PRICE.

Happy over all and glad someone made it easy for my price range, they've been very helpful through the whole process
Coli reçu un peu en retard par rapport aux délais annoncés. Ensuite les éléments (rondelles, rivets...) se trouvaient dans le carton en vrac sans emballage, des rivets étaient tordus donc inutilisables. Une fois monté le broyage est quand même compliqué, c'est dur, vite épuisant, il y a beaucoup de frottements entre les lames et la manivelle fournie n'est pas de bonne qualité. Elle se tord facilement dès que ça bloque, elle aurait méritée d'être vraiment plus solide. Dans l'ensemble je suis déçu de mon achat même si l'ensemble est solide, je pense à mettre un moteur car ce n'est pas envisageable de continuer manuellement.

-
(translated by the Bazar Team)
Package received a little late compared to the announced deadlines. Then the elements (washers, rivets...) were in the loose box without packaging, the rivets were twisted and therefore unusable. Once mounted, the grinding is still complicated, it's hard, quickly exhausting, there is a lot of friction between the blades and the crank provided is not of good quality. It twists easily as soon as it blocks, it would have deserved to be really stronger. Overall I'm disappointed with my purchase even if the whole thing is solid, I'm thinking of putting in a motor because it's not possible to continue manually.
Excellent services. Very fast response.
A fantastic product machined to exacting levels of accuracy. Great communication and assistance throughout the process. Arrived well packaged and in great time. Would definitely recommend to buy from the team.
Very Quick to respond to questions; knowledgeable about shredder construction and parts sourcing; Order shipped quickly and delivered in perfect condition. They are a very good asset to the PP community.

I highly recommend!
Write a review

V2.1 EN8 BRITISH STEEL PARTS KIT - QUALITY LASERCUT PARTS 6MM MESH INCLUDED. VERY LOW PRICE

130.00
In stock
+
Contact Seller
Shipping Information :
Seller VAT Number ?:
no VAT number listed by the seller, please reach out to them