V3.3  latest version of the Stainless Shredder Basic. fully built

This design is much Stronger than all previous versions of the PP shredders, Much easier to maintain or service during downtime. The V3.3 has never been so simple and accessible.

Stainless Shaft is 30mm for extra strength, plus torque requirements, thus allows for higher powered motor attachment. Shaft is Keyway milled to allow for coupling 8mm key slot. Length of shaft is 300mm.

The design has thicker Steel Plate. (Used to be welded 3mm, and 4mm, 6mm plates. Now it's 10mm and 5mm and 4mm for increased strength, reliability of operation.Tab slot design for ease of building.

Shredder is designed to be clamped/compressed together with positioned tabs plus M10 threaded rod, where as before on the old designs it was welded at many points.  

14 blade Stainless basic Dimensions: Shaft length 300mm X 210mm (wide) X 145mm (High)

Box Cutting Area: 124mm x 148mm

The shredder basic comes built with 2 blade standard teeth design for shipment.

Stainless Sieveframe/mesh is Pre-welded for you. The sieve has been fully re-designed to allow ease of handling and fitment into the granulation area.  

Sieve assembly is much stronger with safety as a factor for operators.   A Handle is added to the sieve frame for added safety. 

- Welding carried out to BS4872 certified Standards. Stainless core welded.

 
What's Included ?
- Fully built or kit - Ready to Ship. 17KG.   
- 30mm Machined Steel Hex Shaft with 8mm Keyway for Coupling Fitment. 
- Pre Welded steel Sieve and Mesh (5mm round mesh holes). 
- All Nuts & Bolts pwashers. M10 Threaded Rod.
- Quality UCFL206 Dunlop Bearings. Bolts and washers, Bearings Pre greased. 
- Fibre laser cut steel parts of high quailty tolerance. 

V3.3 New Version Shredder machines are designed towards a modular format, allowing customers to convert - de-assemble or re-assemble as simply as a small IKEA flat pack process.

Please chat with us if you would like a cheaper shredder as a kit and shipped.

Extras to Purchase : 

Galvanised Steel Hopper designed to compliment the V3.3 Shredder. The lid of this design allows for a pressure rod to be used to maintain downwards pressure on materials being shredded. The perspex Hopper window is not included. No extra shipping costs if purchased with shredder above.

Well Designed and strong mild steel Crank Handle to assist with your V3.3 Shredder needs. The Crank handle comes with pre-welded Coupling to fit snug upon the shaft/Keyway of the Shedder unit. No added shipping cost if purchased with shredder above.

Tools required to Assemble or Disassemble the V3.3
- M14 socket and wrench.
- M10 socket and wrench
- Pair of grips or mole grips.
- Adjustable spanner suitable for M10 nuts
- Hexagonal key of 3mm for bearing set screws.

Motor is not included.

Assembly manual available. Please message.

https://bazar.preciousplastic....


Please message your location to be added to the shipping list if you do not see it listed in the shipping section or find you cannot order due to location issue.


Please check your shipping Destination. Modulardesignpp are going all we can to keep the price low. Certain international customers may find that imported goods could be subject to import/customs duties.

Thank you and Please message if you would like to order the kit version. we will set up a page at much cheaper price.