Bosch Rexroth EFC5610 3kW 400V 3ph AC Inverter Drive, HMI, DBr, STO, C3 EMC
Bosch Rexroth EFC 5610 Series AC Inverter for 3kW (4HP) 400V 3 Ph motor to 7.4A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size D: 120mm Wide x 175mm Deep x 231mm High. IP20.
Overload: 150% x 60 seconds
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 140 Ohm, maximum 200 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
STO Included. SIL3, Cat 4.
Input Current: 9.1A.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 135W.
Mounting via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 80mm x 221mm centres.
Domestic shipping to
There are no reviews yet! You dare to go first? :)