Extrusion - v4.3 - Lydia

3,500.00
In stock
+
Shipping time and rates:
Extrusion v4 - Lydia

Popular PP extruder , perfect for labs, small enterprises; updated for a bigger screw and motor.

Type: Extruder
Version: 4.3
Status: Tested
License CERN Open Source Hardware License
Authors
Type Single Screw
Weight 110 kg
Power (W) 5 kW
Voltage 380V or 220V
Amperage 16A
Input Flake Size Small
Screw diameter 30mm
Length of screw (mm) 900 mm
Effective screw length 600 mm
Rated Motor Power 3 kW
Motor
- Rated Motor output Torque 109 Nm
- Rated Motor output speed 263 RPM
- Heating zones 3
Heating power: max. 2 kW

Dimensions

dimensions.JPG


Parts

parts.JPG

Part Nr. Description Configuration
1 Extrusion Hopper Stainless 2mm
2 Screw Shield Stainless 2mm
3 Heatbands 7x 300W Brass
4 Screw & Shield Support Mount
5 Nozzle
6 Motor 1480RPM | 3Kw | Supports 220V | 380V
7 Reducer 1:30
8 Motor Flange 160mm diameter | 8x M10 bolts
9 Barrel Flange 100mm diameter | 8x M8 bolts
10 Bearing Housing
11 Extrusion Screw 30mm diameter
12 Power Switch Motor Contactor
13 Emergency Switch
14 VFD Panel
15 Feed Zone PID (Temperatur Controller) Inkbird 100 VH
16 Mixing Zone PID (Temperatur Controller) Inkbird 100 VH
17 Nozzle Zone PID (Temperatur Controller) Inkbird 100 VH
18 Power Switch Heating Contactor
19 Direction Switch
20 Baseplate 80cm x 15mm x 200mm

Features

  • Advanced extrusion control with optimized workflow to fill molds
  • Jam detection
  • Status lights : Ok & Error
  • Emergency and reset button
  • Various motor protections (thermal & magnetic).
  • Rigid, flexible and modular framework – enabling hacking and extensions. The base plate is 15 mm thick.
  • Extrusion hopper can be easily detached.
  • Thermocouples (sensors) have clips, easy to detach.
  • Complies also with basic regulations in schools.
  • Stops automatically after one hour of inactivity.
  • High quality cables and wiring according to industrial standards.
  • Compression screw according to v4 with added extra strength
  • Stronger taper bearings extra trust bearing
  • Quality heatbands and PID controllers
  • Simplified bearing housing design with no exotic parts as in v4, easy to replace and scale for even bigger screws

Product Resources

Social resources and references of our v3 extruder





Country of Origin:
Spain
Dimensions :
110x40x70CM
Weight (KG):
105KG

No posts found

Write a review

Domestic shipping to

Spain:
  • One item: €140.00
  • Each additional item: €0.00