USA - Screw for Extruder - 24.6mm X 588mm

Good day sir! Is the space between the varrel and screw critical ?

Hello Jejomar, Yes, you cannot have a loose screw inside the barrel (tube) because the plastic will get stuck to the walls of the barrel. The space should be less than 0.6mm inside the tube.

If you need 25mm diameter tube, i can provide a 500mm X 25mm (internal diameter) tube for €30 (US$37)+ shipping.

Best Regards

L.Andrade

Do you ship to the Netherlands? And if so what are the costs?

same goes for the matching tube.

Yes, we can ship to the Netherlands, the best price i have found is with USPS for €50.

Let me know if this works for you.

Best Regards

L.Andrade

So €239 for the screw, €30 for the tube and €50 for shipping them combined?

Makes €319. Let me know if thats right.

Kind regards.

Kees Theeuwes

Hi,

I just ordered the screw but only saw later the item will be available later this month. Do you have any clue on how long it will take approximately from now to delivery date?

Kind regards,

Ruben

Hello Ruben, hope you are doing fine.

I believe it will take about 15 days from now.

If you send another €40 i can send the tube and screw together.

Let me know if this works for you.

Best regards

L.Andrade

Hi L.Andrade,

Apologies for my delayed reply. Your offer about sending the tube and screw together sounds good to me. I'll transfer the money to you later today.

Kind regards,

Ruben

Hello Ruben, take a look at this listing: https://bazar.preciousplastic.com/en/listings/550106-24-dot-7mm-extruder-screw-plus-25mm-diameter-tube-bundle

Let me know if it works for you

Best regards

Will this screw work with a 1" pipe?

Some of the people who bought this screw told me they were going to use it with a 1" tube/pipe, i haven't heard a response back from them yet but i guess it can be used without problem, the only thing is that the pressure generated inside the tube will be lower than using a 25mm tube.

hello, do you use paypal, and tell me what is the out side diameter please,

I have interest to buy you the screw and barrel.

Yes, we accept Paypal. the outside diameter of the tube is 35mm.

The bundle is listed here:

https://bazar.preciousplastic.com/en/listings/674172-24-dot-6mm-extruder-screw-plus-barrel-w-slash-brackets-bundle

Note that turnaround time is rather long during the holiday season.

Thanks

bonjour je recherche le même système mes en longueur maxi de 200mm de long pour faire une petite injecteuse pouvez vous m aider

Bonjour, quel produit avez-vous besoin ?

Merci

vis d'extrusion longueur 200mm

merci

OK, nous pouvons produire une vis avec la longueur de 200mm.

Avez-vous la conception?

Le prix est d'environ 250 euros.

Merci

non pas de conception est ce le meilleur prix que vous avez car ses pour un prototype si cela fonctionne j aurais plusieurs commande

Je comprends, mais c'est la même conception de la vis en Precious Plastic, correct?

La longueur doit être de 200mm.

Pour le prototype, le prix minimum est 220 euros + expédition.

Je peux obtenir un meilleur prix si vous faites une grande quantité.

Faites-moi savoir si vous avez d'autres questions.

Sinceres salutations

Hi! I am interested in the extrusion screw. Is this still for sale? Where in the USA are you located (map says Edinboro, PA; not far from me)?

Hello, happy new year, i am in Homestead, Florida. Shipping is US$20.

The screw is for sale and it is in stock.

Let me know if you have more questions

best regards