plasticpreneur ultimate injection
A machine for developing high quality products as well as quick and easy mass production. Also pefect for educational workshops with kids, schools, students organizations and so on.
Next batch will be delivered beginning of february.
Major changes to the original Precious Plastic Injection:
Arbor press drive:
enables to apply a continuous pressure regardless
of the position of the lever.
High pressing force with a small operating force
200N on the handwheel result in 3437N on the
Piston. Compared to the ~ 800N operating force
which are required on the classic lever based
injection design to reach the same 3400N on the
Tight tolerated Injection cylinder (H8) with a
extreme smooth surface finish (max. Ra 0,8)
combined with a low friction brass Piston which
ensures a smooth run of the assembly and nearly
zero friction losses.
Expanded Injection capacity from 185cm³ to
Level indicator in cm³ for a more comfortable and
production oriented work environment.
30mm mineral wool insulation for a fast heat up
stable work temperatures and a lower energy
four industry standard heating elements with 220W
each (no ebay or aliexpress material)
Spring loaded mould clamping system with an easy
to use toggle clamp, which allows to use mould with
a height from 20mm up to 350mm
Table size 250x250mm
Nozzle - mould connection via a simple conical
nozzle which seals to a 45° chamfer in the mould for
a mould exchange in a matter of seconds.
Maschine Base is collapsible for a easy transport
even in small cars.
Frame made out of 18mm Birch (Multiplex)
Plywood, which is a ecological and easy to modify
alternative to steel frames.
Simple, rigid, and space saving wall mount.
Productivity and quality related features:
left or right attachable side table for a small hot
plate or as tool tray.
Temperature controlled Euro power outlet to plug in
a single plate stove which can be used as a Mould
If wished it can be sold with CE marking!
Shipping Size: 1200x600x400
Manufactured and assembled in Austria